| |
FortiAP-222E |
| Indoor/Outdoor Deployment |
Outdoor AP |
| Number of Radios |
2 + 1 BT/BLE |
| Number of Antennas |
4 External + 1 BT/BLE External |
| Antenna Type and Peak Gain |
Dipole: 5 dBi for 2.4 GHz, 7 dBi for 5 GHz |
| Frequency Bands (GHz)* |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 Capabilities |
2.4 GHz b/g/n (2×2:2 stream) 20/40 MHz (256 QAM) |
| Radio 2 Capabilities |
5 GHz a/n/ac (2×2:2 stream) 20/40/80 MHz (256 QAM) |
| Maximum Data Rate |
Radio 1: up to 400 Mbps
Radio 2: up to 867 Mbps |
| Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
| Interfaces |
1x 10/100/1000 Base-T RJ45 |
| Power over Ethernet (PoE) |
IEEE 802.3af/at |
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication |
WPA and WPA2 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
| Maximum Tx Power |
2.4 GHz: 27.2 dBm / 525 mW (2 chains combined)*
5 GHz: 29.5 dBm / 891 mW (2 chains combined)* |
| Kensington Lock |
No |
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az |
| SSID Types Supported |
Local-Bridge, Tunnel & Mesh (when managed by controller) |
| Per Radio Client Capacity |
Up to 512 |
| Cellular Co-existence |
Yes |
| LED Off Mode |
Yes |
| 802.11ac Wave 2 MU-MIMO |
Yes |
| Transmit Beam Forming (TxBF) |
Yes |
| Low-Density Parity Check (LDPC) Encoding |
Yes |
| Maximum Likelihood Demodulation (MLD) |
Yes |
| Maximum Ratio Combining (MRC) |
Yes |
| A-MPDU and A-MSDU Packet Aggregation |
Yes |
| MIMO Power Save |
Yes |
| Short Guard Interval |
Yes |
| Rogue Scan Radio Modes |
Background, Full-time |
| WIPS / WIDS Radio Modes |
Background, Full-time |
| Packet Sniffer Mode |
Yes |
| Spectrum Analyzer |
Yes |
| Length x Width x Height |
9.8 x 8.66 x 2 inches (249 x 220 x 53 mm) |
| Weight |
3.40 lbs (1.54 kg) |
| Package (shipping) Weight |
8.40 lbs (3.81 kg) |
| Mounting Options |
Wall Mount or Pole Mount |
| Included Accessories |
Mounting kit for Wall or Pole, Grounding cable, 4 dipole WiFi antennas, 1 BLE antenna |
| Power Supply |
GPI-115, or GPI-130 |
| Power Consumption (Max.) |
12.95 W |
| Humidity |
5% to 90% non-condensing |
| Operating Temperature |
–40 to 140°F (-40–60°C) |
| Storage Temperature |
-40 to 158˚F (-40 to 70˚C) |
| Directives |
Low Voltage Directive • RoHS2 |
| UL2043 Plenum Material |
No |
| Mean Time Between Failures |
>10 Years |
| IP Rating |
IP67 |
| Surge Protection Built In |
Yes |
| Hit-less PoE Failover |
No |
| WiFi Alliance Certified |
Yes |
| DFS |
FCC, IC, CE |
| Limited Lifetime Warranty |
No — 1 Year Limited Warranty |
