|
FortiAP-S221E |
Hardware Type |
Indoor AP |
Number of Radios |
2 + 1 BT/BLE |
Number of Antennas |
4 Internal + 1 BT/BLE internal |
Antenna Type and Peak Gain |
PIFA: 3 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz)* |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
2.4 GHz b/g/n (2×2:2 stream) 20/40 MHz (64 QAM) |
Radio 2 Capabilities |
5 GHz a/n/ac (2×2:2 stream) 20/40/80 MHz (256 QAM) |
Maximum Data Rate |
Radio 1: up to 300 Mbps Radio 2: up to 867 Mbps |
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Interfaces |
2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3af & 802.3at |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA and WPA2 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
2.4 GHz: 23 dBm / 200 mW (2 chains combined)* 5 GHz: 22 dBm / 158 mW (2 chains combined)* |
Kensington Lock |
Yes |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az |
SSID Types Supported |
Local-Bridge, Mesh, & Tunnel (when managed by FortiGate) |
Per Radio Client Capacity |
Up to 512 |
Cellular Co-existence |
Yes |
LED Off Mode |
Yes |
802.11ac Wave 2 MU-MIMO |
Yes |
Transmit Beam Forming (TxBF) |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
A-MPDU and A-MSDU Packet Aggregation |
Yes |
MIMO Power Save |
Yes |
Short Guard Interval |
Yes |
Rogue Scan Radio Modes |
Background, Full-time |
WIPS / WIDS Radio Modes |
Background, Full-time (recommended) |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Length x Width x Height |
7.87 x 7.87 x 1.81 inches (200 x 200 x 46 mm) |
Weight |
1.2 lbs (0.55 kg) |
Package (shipping) Weight |
2.5 lbs (1.15 kg) |
Mounting Options |
Ceiling, T-Rail, and Wall |
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
Power Supply |
SP-FAP200-PA-XX, GPI-115, or GPI-130 |
Power Consumption (Max.) |
24 W |
Humidity |
5% to 90% non-condensing |
Operating Temperature |
–40 to 122°F (-20–50°C) |
Storage Temperature |
-40 to 158˚F (-40 to 70˚C) |
Directives |
Low Voltage Directive • RoHS2 |
UL2043 Plenum Material |
No |
Mean Time Between Failures |
>30 Years |
IP Rating |
— |
Surge Protection Built In |
— |
Hit-less PoE Failover |
No |
WiFi Alliance Certified |
Yes |
DFS |
FCC, IC, CE, Japan |
Limited Lifetime Warranty |
Yes |