|
FortiAP U431F |
FortiAP U433F |
Hardware Type |
Indoor AP |
Indoor AP |
Number of Radios |
3 + 1 BT/BLE |
3 + 1 BT/BLE |
Number of Antennas |
10 Internal + 1 BT/BLE Internal |
10 External (RP-SMA) + 1 BT/BLE Internal |
Antenna Type and Peak Gain |
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Dipole: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
5.0 GHz a/n/ac/ax (4×4:4 stream) 20/40/80/160 MHz (64 QAM and 1024 QAM) |
5.0 GHz a/n/ac/ax (4×4:4 stream) 20/40/80/160 MHz (64 QAM and 1024 QAM) |
Radio 2 Capabilities |
2.4 GHz or 5.0 GHz (high band) a/b/g/n/ac/ax (4×4:4 stream) 20/40/80/160 MHz (64 QAM and 1024 QAM) |
2.4 GHz or 5.0 GHz (high band) a/b/g/n/ac/ax (4×4:4 stream) 20/40/80/160 MHz (64 QAM and 1024 QAM) |
Radio 3 Capabilities |
2.4/5.0 GHz dual band b/g/n/ac (2×2:2 stream) 20/40 MHz (64 QAM) |
2.4/5.0 GHz dual band b/g/n/ac (2×2:2 stream) 20/40 MHz (64 QAM) |
Maximum Data Rate |
Radio 1: up to 4,804 Mbps Radio 2: up to 4,804 Mbps Radio 3: up to 300 Mbps |
Radio 1: up to 4,804 Mbps Radio 2: up to 4,804 Mbps Radio 3: up to 300 Mbps |
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Interfaces |
1x 10/100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
1x 10/100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3at |
Dual redundant PoE power ports with support for IEEE 802.3at |
Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3at (2×2 @ 17 dBm with 802.3af; USB disabled) |
Dual redundant PoE power ports with support for IEEE 802.3at (2×2 @ 17 dBm with 802.3af; USB disabled) |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
Radio 1: 5 GHz: 24 dBm / 251 mW (4 chains combined)* Radio 2: 2.4 GHz: 26 dBm / 398 mW (4 chains combined)* 5 GHz: 24 dBm / 251 mW (4 chains combined)* Radio 3: 2.4 GHz: 22 dBm / 158 mW (2 chains combined)* |
Radio 1: 5 GHz: 24 dBm / 251 mW (4 chains combined)* Radio 2: 2.4 GHz: 26 dBm / 398 mW (4 chains combined)* 5 GHz: 24 dBm / 251 mW (4 chains combined)* Radio 3: 2.4 GHz: 22 dBm / 158 mW (2 chains combined)* |
Kensington Lock |
Yes |
Yes |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az |
SSID Types Supported |
Local-Bridge, Mesh, & Tunnel |
Local-Bridge, Mesh, & Tunnel |
Per Radio Client Capacity |
Up to 512 |
Up to 512 |
Cellular Co-existence** |
Yes |
Yes |
LED Off Mode |
Yes |
Yes |
802.11ac MU-MIMO Wave 2 |
Yes |
Yes |
Transmit Beam Forming (TxBF) |
Yes |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
Yes |
A-MPDU and A-MSDU Packet Aggregation |
Yes |
Yes |
MIMO Power Save |
Yes |
Yes |
Short Guard Interval |
Yes |
Yes |
OFMDA |
Yes |
Yes |
Rogue Scan Radio Modes |
Background, Dedicated |
Background, Dedicated |
WIPS / WIDS Radio Modes |
Background, Dedicated (recommended) |
Background, Dedicated (recommended) |
Packet Sniffer Mode |
Yes |
Yes |
Spectrum Analyzer |
Yes |
Yes |
Length x Width x Height |
8.46 x 8.46 x 2.26 inches (215 x 215 x 57.5 mm) |
8.46 x 8.46 x 2.26 inches (215 x 215 x 57.5 mm) |
Weight |
1.0 lb (0.453 kg) |
1.0 lb (0.453 kg) |
Package (shipping) Weight |
1.8 lbs (0.82 kg) |
1.8 lbs (0.82 kg) |
Mounting Options |
Ceiling, T-Rail and Wall |
Ceiling, T-Rail and Wall |
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
Mount kits for Ceiling, T-Rail, and Wall, 10x dipole antennas |
Power Supply |
SP-FAP200-PA-XX, or GPI-130 |
SP-FAP200-PA-XX, or GPI-130 |
Power Consumption (Maximum) |
24.5 W |
24.5 W |
Humidity |
10–90% Non-Condensed 5–90% Condensed |
10–90% Non-Condensed 5–90% Condensed |
Operating / Storage Temperature |
32–122°F (0–50°C) / -31–158°F (-35–70°C) |
32–122°F (0–50°C) / -31–158°F (-35–70°C) |
Directives |
Low Voltage Directive • RoHS |
Low Voltage Directive • RoHS |
UL2043 Plenum Material |
Yes |
Yes |
Mean Time Between Failures |
>30 Years |
>30 Years |
IP Rating |
— |
— |
Surge Protection Built In |
— |
— |
Hit-less PoE Failover |
Yes (802.3at only) |
Yes (802.3at only) |
Wi-Fi Alliance Certified |
No |
No |
DFS |
— |
— |
Limited Lifetime Warranty |
Yes |
Yes |