The HPE ProLiant SL250s Gen8 server is designed for deployment in HPE’s s6500 scalable system chassis. Up to four of these half-width, 2U server nodes can be installed in the HPE s6500 chassis. Each server node can support up to three GPUs, or four additional small-form factor hard drives. System Administrators have their choice between Xeon E5-2600 processors, or next generation E5-2600 v2 processors.
Performance
This dual-socket platform supports up to two processors from Intel’s Xeon E5-2600, or E5-2600 v2 processor families. V2 processors offer up to 12 cores and 30MB cache each, whereas Xeon E5-2600 processors only offer up to 8 cores each and 20MB of cache. Intel’s v2 processors also handle virtualization applications more efficiently and reduces virtualization overhead to four percent of processor utilization. Both processors support Intel’s Hyper-Threading Technology which allows each processor core to support double the amount of threads.
Memory
In a two-processor configuration, this server will support up to 16 DDR3 memory modules running at speeds of up to 1866MHz. Registered (RDIMM), unbuffered (UDIMM), and load-reduced (LRDIMM) memory modules are supported, but mixing the different types of memory within a single server is not. For the fastest system performance and to reach the system’s max memory footprint of 512GB requires 16 x 32GB LRDIMM modules. Specifically designed for ProLiant servers, HPE’s SmartMemory unlocks advanced memory features to take full advantage of the performance, dependability, and power savings this server has to offer.
Storage
The front of the HPE SL250s Gen8 supports four small form factor (SFF) drive bays, all of which are hot-swappable for easy repairs or upgrades. To reach the maximum server capacity of 4.8TB, this system needs to be configured with four 1.2TB drives. Businesses that require additional storage can replace the three GPUs and add another four SFF bays with a hard drive kit. Keep in mind when ordering a Smart Array HD controller that certain models are not compatible with v2 E5-2600 processors and will only work with v1 processors
Expansion
Up to four 2U, half-width SL250s server nodes can be installed into HPE’s s6500 system. For expansion, this system has one PCIe slot that is easily accessible from the front panel. HPE’s proprietary FlexibleLOM slot also sits at the front panel to provide a flexible networking solution and is integrated onto the system board. Businesses have their choice of three different FlexibleLOM connections: 1Gb, 10Gb, or InfiniBand. When using the system with three GPU accelerators installed, you will need at least three HPE 1500W hot-plug power supplies.
Management
HPE’s iLO 4 is embedded on the system board to monitor server health and provide remote system management capabilities. SmartStart CDs and Smart Update Firmware DVDs are no longer necessary and have been replaced by HPE’s Intelligent Provisioning to simplify server deployment and configuration. iLO also monitors the server’s temperatures and automatically adjusts server fans to maintain proper cooling. Management tools have a more efficient layout with ProLiant Gen8 servers, and can be easily accessed on a single screen.
Summary
The HPE ProLiant SL250s Gen8 server provides dual-socket performance in just a small half-width, 2U modular form factor. Ideal for businesses looking for high-performance scalability, up to four of these server nodes fit into HPE’s 4U s6500 system chassis. Each node supports up to four SFF hot-swappable drives for a maximum storage capacity of 4.8TB. For extra storage, system admins can opt to configure this system with four additional SFF drives by replacing the system’s three GPUs with an internal drive cage. Adding to the system’s customization, users have their choice of two different processor families, with v2 processors supporting more cores and cache. Remote management is made possible through HPE’s iLO 4 which is embedded on the system board of all HPE ProLiant Gen8 servers making integration a hassle-free process.
PROCESSOR – 2 SOCKET
Intel® Xeon® processor E5-2600 and E5-2600 v2 product families
ON SYSTEM MANAGEMENT PROCESSOR
HPE iLO (Firmware: HPE iLO 4)
MEMORY PROTECTION
Advanced ECC (multi-bit error protection)
MEMORY
Type:
HP SmartMemory
DDR3 Registered (RDIMM), Unbuffered (UDIMM)
DIMM Slots Available:
16 total DIMM Slots available
Maximum (RDIMM) (per server tray)
256GB (16 x 16GB) Registered memory configurations
Maximum (UDIMM) (per server tray)
128GB (16 x 8GB)
Maximum (LRDIMM) (per server tray)
512GB (16 x 32GB) LRDIMM memory configurations
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz, or 1066MHz.
NETWORK CONTROLLER
HP Ethernet 1Gb 2-port 361i
EXPANSION SLOTS
Expansion Slots
Technology
Bus Width
Connector Width
Form Factor
Notes
Low Profile
PCIe 3.0
x8
x8
Half-length, half-height
Front Panel Access
FlexibleLOM
PCIe 3.0
x16
x16
FlexibleLOM
Front Panel Access
GPU 1: Rear bottom
PCIe 3.0
x16
x16
Full-length, full height
GPU only
GPU 2: Rear top
PCIe 3.0
x16
x16
Full-length, full height
GPU only
GPU 3: Front top
PCIe 3.0
x16
x16
Full-length, full height
GPU only
STORAGE CONTROLLERS
HP H220i Host Bus Adapter (B320i Dynamic Smart Array with FW update)
INTERNAL STORAGE DEVICES
Diskette Drives
Via USB through the SUV port, external support only
Optical Drives
Via USB through the SUV port, external support only
Hard Drives
None ship standard
MAXIMUM INTERNAL STORAGE
2U Half Width tray
Hot Plug SAS SFF
4.8 TB
4 x 1.2TB
Hot Plug SATA SFF
4.0 TB
4 x 1TB
Hot Plug SAS SSD SFF
3.2 TB
4 x 800 GB
Hot Plug SATA SSD SFF”
3.2 TB
4 x 800 GB
Quick Release SAS SFF
4.8 TB
8 x 1.2 TB
Quick Release SATA SFF
4.0 TB
8 x 1 TB
Quick Release SSD SAS SFF
2.4 TB
4 x 600 GB
INTERFACES
Network RJ-45
Two 1GbE or 10 GbE NIC ports
FlexibleLOM
ProLiant Gen8 servers offer a new networking technology – Flexible Network Technology. The SL250 Gen8 server offers the customer the choice of 1Gigabit, 10Gigabit or InfiniBand FlexibleLOM solutions depending on workload. For further details on the choices, see FlexibleLOM in the Networking Section of this document.
KVM
Serial USB Video Port (SUV)
Micro SD
1 (internal)
USB Ports
1 (internal)
HPE iLO Remote Management Network Port
1 GB Dedicated
Health LED
1 front
Power
1 front
UID
1 front
INDUSTRY STANDARD COMPLPIANCES
ACPI 2.0b Compliant
PCIe 3.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
USB 1.1 and 2.0 Compliant
SMBIOS 2.6.1
SYSTEM FANS
HPE s6500 Redundant Fan Kit
HPE s6500 Non-Redundant Fan Kit
OPERATING SYSTEMS AND VIRTUALIZATION SOFTWARE SUPPORT FOR PROLIANT SERVERS
Microsoft Windows Server
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
Citrix XenServer
GRAPHICS
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 on System Management Memory
16 MB Flash
256 MB DDR3 with ECC (112 MB after ECC and video)
FORM FACTOR
Fully configured SL250 is 2U, half-width
Fully configured SL6500 chassis is 4U, full-width
ON SYSTEM MANAGEMENT
HP iLO Management Engine
HP INSIGHT MANAGEMENT SOFTWARE
HP Service Pack for ProLiant (SPP)
SECURITY
Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator’s password
iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption
Clique aqui e responda nosso questionário, baseado em sua necessidade e nosso estoque lhe indicaremos a melhor solução!
Entre em contato e solicite um orçamento agora!
Precisando alugar, fazer locação ou comodato de servidor e servidores ? Faça contato com a TND Brasil através do telefone (11) 3717-5537 , e-mail [email protected] ou envie uma mensagem no formulário abaixo:
Este site usa cookies para que possamos oferecer a melhor experiência de usuário possível. As informações dos cookies são armazenadas em seu navegador e executam funções como reconhecê-lo quando você retorna ao nosso site e ajudar nossa equipe a entender quais seções do site você considera mais interessantes e úteis.
Cookies estritamente necessários
O cookie estritamente necessário deve estar sempre ativado para que possamos salvar suas preferências de configuração de cookies.
Se você desabilitar este cookie, não poderemos salvar suas preferências. Isso significa que toda vez que você visitar este site, precisará habilitar ou desabilitar os cookies novamente.