|
FORTIAP U234F |
Hardware Type |
Outdoor AP |
Number of Radios |
3 + 1 BLE |
Number of Antennas |
2 Wi-Fi 5.0GHz band + 4 dual band Wi-Fi + 1 Single band 2.4GHz BLE/ZigBee |
Antenna Type and Peak Antenna Gain |
Directional patch Antenna |
Frequency Bands (GHz) * |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 |
2.4 GHz a/b/g/n (2×2 2stream) (64 QAM) or 5.0 GHz (high band) a/b/g/n/ac/ax (2×2 2 stream) 20/40/80/160 MHz (64/256/1024 QAM) |
Radio 2 |
5.0 GHz a/n/ac/ax (2×2 2 stream) 20/40/80/160 MHz (64/256/1024 QAM |
Radio 3 |
2.4/5.0 GHz dual band b/g/n/ac (2×2 2 stream) 20/40 MHz (64 QAM) |
Maximum Data Rate |
Radio 1 up to 2,402 Mbps Radio 2 up to 2,402 Mbps Radio 3 up to 300 Mbps |
Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
Interfaces |
1x 100/1000/2500 Base-T RJ45(802.2bt/at PoE) 1 x 10/100/1000 Base-T RJ45 (802.3af PoE PSE), 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
802.3bt PoE ships with PoE injector (reset functionality) |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAPMSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist |
Maximum Tx Power |
Radio 1 2.4GHz 25 dBm / 316 mW (2 chains combined)* 5GHz 25 dBm / 316 mW (2 chains combined)* Radio 2 5GHz 25 dBm / 316 mW (2 chains combined)* Radio 3 2.4GHz 27 dBm / 501 mW (2 chains combined)* 5GHz 25 dBm / 316 mW (2 chains combined)* |
Kensington Lock |
No |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.11ax, 802.3bz |
SSID Types Supported |
Local-Bridge, Mesh, and Tunnel |
Per Radio Client Capacity |
Up to 512 clients per Radio1 and Radio2 |
Cellular Co-existence |
Yes |
LED Off Mode |
No |
OFDMA |
Yes (UL and DL) |
Spatial Reuse (BSS Coloring) |
Yes |
UL MU-MIMO |
Yes |
DL MU-MIMO |
Yes |
Enhanced Target Wake Time (TWT) |
Yes |
ZeroWait DFS /Agile DFS |
Yes |
Rogue Scan radio modes |
Background and Dedicated |
WIPS / WIDS radio modes |
Background and Dedicated (recommended) |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Length x Width x Height (inches) |
12.45 x 8.59 x 1.66 inches (316.18 x 218.16 x 42.21 mm) |
Weight |
2.66 lbs (1.207 kg) |
Package (shipping) Weight |
5.86 lbs (3.6 kg) |
Mounting Options |
Wall/ Pole |
Included Accessories |
1-2. Wall/ Pole bracket 3. POE adapter – PIN060-54PR 4. Power cable 5. Grounding cable 6. Mounting Kit (Pole straps; mounting bolts, screws; grounding screws) |
Power Supply |
802.3bt/at (ships with passive PoE injector with build in reset switch) |
Power Consumption (Maximum) |
21 W |
Humidity |
10–90% non condensing |
Operating / Storage Temperature |
22–140°F (-40 – 60°C) / -40–176°F (-40–80°C) |
Directives |
Low Voltage Directive • RoHS |
UL2043 Plenum Material |
No |
Mean Time Between Failures |
>10 Years |
Surge Protection Built In |
Yes |
IP Rating |
IP67 |
Hit-less PoE Failover |
N/A |
Wi-Fi Alliance Certified |
No |
DFS |
FCC, IC, CE, Taiwan |
Limited Lifetime Warranty |
Yes |