| |
FORTIAP 231G |
FORTIAP 233G |
| Hardware Type |
Indoor AP |
| Number of Radios |
3 + 1 BLE |
| Number of Antennas |
Internal x2 Dual band Wi-Fi + x2 Tri-band Wi-Fi & Scanning + 1 Single band 2.4GHz BLE/ ZigBee |
External x2 Dual band Wi-Fi + x2 Triband Wi-Fi & Scanning + Internal 1 Single band 2.4GHz BLE/ZigBee |
| Antenna Type and Peak Gain |
PIFA antenna. Dual band: 4.5 dBi for 2.4GHz, 5.5 dBi for 5 GHz Tr-band: 4.5 dBi for 2.4GHz, 5.5 dBi for 5 GHz & 5.5dBi for 6GHz band BLE antenna: 4.0dBi for 2.4Ghz |
Omni Directional antenna. Dual band: 4.5 dBi for 2.4GHz, 4.5 dBi for 5 GHz. Tr-band: 4.5 dBi for 2.4GHz, 4.5 dBi for 5 GHz & 4.5dBi for 6GHz band BLE PIFA antenna. Single band: 4.0dBi for 2.4GHz |
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850, 5.925–6.425, 6.425–6.525, 6.525–7, 5.925–6.875, 6.875–7.125 |
| Radio 1 Capabilities |
Frequency band: 2.4GHz
Channel width: 20/40MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO Chains: 2×2 Service |
| Radio 2 Capabilities |
Frequency band: 5.0GHz
Channel width: 20/40/80/80+80MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO Chains: 2×2 Service |
| Radio 3 Capabilities |
Frequency bands: 6.0GHz
Channel width: 20/40/80/160MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO Chains: 2×2 Service and scanning |
| Maximum Data Rate |
Radio 1: up to 574 Mbps
Radio 2: up to 1201 Mbps
Radio 3: : Up to 2401 Mbps |
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
| Interfaces |
1 100/1000/2500 Base-T RJ45, 1 10/100/1000 Base-T RJ45, 1x Type 3.0 USB, 1 RS-232 RJ45 Serial Portt |
| Power over Ethernet (PoE) |
1 x 802.3at PoE default |
| Simultaneous SSIDs |
Up to 24 |
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist |
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz: 23 dBm / 200 mW (2 chains combined)
Radio 2: 23 dBm / 158 mW (2 chains combined)
Radio 3: 6GHz: 21 dBm 80 mW (2 chains combined @ 160MHz BW) |
| Kensington Lock |
Yes |
| IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
| SSID Types Supported |
Local-Bridge, Tunnel, and Mesh |
| Per Radio Client Capacity |
Up to 512 clients per radio (Radio1, Radio2 and Radio3) |
| Cellular Co-existence |
Yes |
| LED Off Mode |
Yes |
| OFDMA |
Yes |
| Spatial Reuse (BSS Coloring) |
Yes |
| UL MU-MIMO |
Yes |
| DL-MU-MIMO |
Yes |
| Enhanced Target Wake Time (TWT) |
Yes |
| ZeroWait DFS |
No |
| Rogue Scan radio modes |
Background, Dedicated |
| WIPS / WIDS radio modes |
Background, Dedicated (recommended) |
| Packet Sniffer Mode |
Yes |
| Spectrum Analyzer |
Yes |
| Length x Width x Height |
7.18 x 7.18 x 2.12 inches (182.4 x 182.4 x 54.0 mm) |
| Weight |
1.75 lbs (0.8 kg) |
1.95 lbs (0.88 kg) |
| Mounting Options |
Ceiling, T-Rail, and Wall |
| Included Accessories |
Standard Mount kit for Ceiling, T-Rail, and Wall |
| Power Supply |
SP-FAP400-PA-XX or 802.3at PoE (GPI-130) |
| Power Consumption (Maximum) |
Depends on PoE connected |
| Humidity |
5 – 90% non condensing |
| Operating / Storage Temperature |
32°–122°F (0° – 50°C) / -22°–158°F (-30°–70°C) |
| Directives |
Low Voltage Directive • RoHS |
| UL2043 Plenum Material |
Yes |
| Mean Time Between Failures |
> 10 Years |
| IP Rating |
N/A |
| Surge Protection Built In |
Yes |
| Hit-less PoE Failover |
N/A |
| WiFi Alliance Certified |
Yes |
| DFS |
CE |
| Limited Lifetime Warranty |
Yes |
