Seg - Sex 07:00-20:00
Seg - Sex 07:00-20:00

Aruba 330 Series

802.11ac Wave 2 that scales up to multi-gig Ethernet


The Aruba 330 Series access points provide the fastest gigabit data speeds and superb user experience for mobile devices and applications in a digital workplace.

Designed with an integrated HPE Smart Rate port to scale up to 5Gbps Ethernet over existing copper, the 330 Series allows enterprises to leverage their multi-gigabit Ethernet wired network infrastructures to eliminate bottlenecks. Also for improved network simplicity and security, Dynamic Segmentation automatically enforces real-time device-level access policies on Aruba wired and wireless networks.

These Wave 2 access points deliver multi-user MIMO (MU-MIMO) aware ClientMatch to boost network efficiency and support the growing device density demands on your network.

Multi-gig Ethernet
ClientMatch unleashes MU-MIMO
Integrated Bluetooth Beacon
Leverage wired multi-gig NBASE-T™-compatible Ethernet infrastructure to eliminate bottlenecks in high-density environments.

Aruba ClientMatch software groups Wave 2 clients together, enabling 4×4:4SS MU-MIMO. That means a faster, more efficient network.

330 series APs have an integrated BLE Beacon to simplify management of a large-scale network of battery-powered Aruba Beacons.


Aruba ClientMatch
Rev up your Wi-Fi
Aruba 802.11ac
See how Aruba MU-MIMO aware ClientMatch delivers the performance gains promised by Wave 2.

Aruba Wave 2 APs can group MU-MIMO capable devices on the best APs, increasing network capacity. Even the slowest clients get a boost.


Dual Radio 802.11ac access point with Multi-User MIMO

Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 or 2SS/VHT160 clients) and up to 600 Mbps in the 2.4 GHz band (with 4SS/HT40 clients)

Antenna polarization diversity for optimized RF performance

Each 5 GHz radio chain has a switch and two antennas

Software controlled; Horizontally and vertically polarized

HPE Smart Rate uplink port that scales up to 5Gbps

Supports up to 5Gbps with NBase-T Ethernet compatibility

Backwards compatible with 100/1000Base-T

Adds support for hitless PoE failover between the HPE Smart Rate port and the secondary 1000Base-T port when both ports are powered

Support for additional 5 GHz bands

Supports software upgrade to enable additional 5 GHz spectrum when governments expand available frequencies

Built-in Bluetooth Low-Energy (BLE) radio

Enables location based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time

Advanced Cellular Coexistence (ACC)

Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment

Quality of service for app visibility and control

Supports priority handling and policy enforcement for unified communication apps, including Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing

Aruba AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 1,500 enterprise apps or groups of apps

RF Management

Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs

The Aruba 330 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available

Spectrum analysis

Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RF interference from HT20 through VHT160 operation


Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances

IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats

Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

SecureJack-capable for secure tunneling of wiredEthernet traffic

Intelligent Power Monitoring (IPM)

Enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities based on the amount of power available to the unit

Software configurable to disable capabilities in certain orders. For the 330 Series APs, by default, the USB interface will be the first feature to turn off if the AP power consumption exceeds the available power budget


AP type: Indoor, dual radio, 5 GHz 802.11ac 4×4 MIMO and 2.4 GHz 802.11n 4×4 MIMO

In addition to 802.11n, the 2.4 GHz radio supports all 802.11ac features as well (proprietary extension)

Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)

5 GHz:

Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4×4 VHT80 or 2×2 VHT160 client devices

Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously

2.4 GHz:

Four spatial stream Single User (SU) MIMO for up to 600 Mbps wireless data rate to individual 4×4 HT40 client devices

Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio

Supported frequency bands (country-specific restrictions apply):

2.400 to 2.4835 GHz

5.150 to 5.250 GHz

5.250 to 5.350 GHz

5.470 to 5.725 GHz

5.725 to 5.850 GHz

Available channels: Dependent on configured regulatory domain

Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

Supported radio technologies:

802.11b: Direct-sequence spread-spectrum (DSSS)

802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

Supported modulation types:

802.11b: BPSK, QPSK, CCK

802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit power: Configurable in increments of 0.5 dBm

Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

2.4 GHz band: +24 dBm (18 dBm per chain)

5 GHz band: +24 dBm (18 dBm per chain)

Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain

Maximum ratio combining (MRC) for improved receiver performance

Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

Short guard interval for 20 MHz, 40 MHz, 80 MHz and 160 MHz channels

Space-time block coding (STBC) for increased range and improved reception

Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

Transmit beam-forming (TxBF) for increased signal reliability and range

Supported data rates (Mbps):

802.11b: 1, 2, 5.5, 11

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 600 (MCS0 to MCS31)

802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)

802.11n high-throughput (HT) support: HT 20/40

802.11ac very high throughput (VHT) support: VHT 20/40/80/160

802.11n/ac packet aggregation: A-MPDU, A-MSDU



Four RP-SMA connectors for external dual band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 2.3 dB in 2.4 GHz and 1.2 dB in 5 GHz.


Four integrated 2.4 GHz downtilt omni-directional antennas for 4×4 MIMO with maximum antenna gain of 3.8 dBi per antenna.

Each 5 GHz radio chain has both a vertically and a horizontally polarized antenna element; AP software automatically and dynamically selects the best set of elements for each data packet transmitted or received.

Four integrated vertically polarized 5 GHz downtilt omni-directional antennas for 4×4 MIMO with maximum antenna gain of 4.9 dBi per antenna.

Four integrated horizontally polarized 5 GHz downtilt omni-directional antennas for 4×4 MIMO with maximum antenna gain of 5.7 dBi per antenna.

Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.

The maximum gain of the combined (summed) antenna patterns for all elements operating in the same band is 1.6 dBi in 2.4 GHz and 2.5 dBi in 5 GHz.


One HPE Smart Rate port (RJ-45, maximum negotiated speed 5 Gbps)

Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX

802.3az Energy Efficient Ethernet (EEE) – PoE-PD: 48 Vdc (nominal) 802.3at PoE

One 10/100/1000BASE-T Ethernet network interface (RJ-45)

Auto-sensing link speed and MDI/MDX

802.3az Energy Efficient Ethernet (EEE)

PoE-PD: 48 Vdc (nominal) 802.3at PoE

DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length

USB 2.0 host interface (Type A connector)

Bluetooth Low Energy (BLE) radio

Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity

Integrated antenna with roughly 30 degrees downtilt and peak gain of 5.1 dBi (AP-334/IAP-334) or 2.2 dBi (AP-335/IAP-335)

Visual indicators (tri-color LEDs): For system and radio status

Reset button: Factory reset (during device power up)

Serial console interface (RJ-45, RS232)

Kensington security slot


The AP supports direct DC power and Power over Ethernet (PoE)

When both power sources are available, DC power takes priority over PoE

Power sources are sold separately

Direct DC source: 48Vdc nominal, +/- 5%

Interface accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length

Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source

When using IPM, the AP may enter power-save mode with reduced functionality when powered by a PoE source (see details on Intelligent Power Monitoring in this datasheet)

Without IPM the AP will apply some fixed restrictions when using PoE:

The USB interface is disabled when using an 802.3at PoE power source

The USB interface and second Ethernet port are disabled, and both radios operate in 1×1 mode when using an 802.3af POE power source

Maximum (worst-case) power consumption: 25.3W (802.3at PoE), 13.2W (802.3af PoE) or 25W (DC)

Excludes power consumed by external USB device (and internal overhead); this could add up to 5.9W (PoE or DC) for a 5W/1A USB device

Maximum (worst-case) power consumption in idle mode: 10.9W (PoE or DC)


The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.

Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details


Dimensions/weight (unit, excluding mount accessories):

225 mm (W) x 224 mm (D) x 52 mm (H), 8.9” (W) x 8.9” (D) x 2.0” (H)


Dimensions/weight (shipping):

335 mm (W) x 290 mm (D) x 85 mm (H), 13.2” (W) x 11.4” (D) x 3.35” (H)




Temperature: 0° C to +50° C (+32° F to +122° F)

Humidity: 5% to 93% non-condensing

Storage and transportation:

Temperature: -40° C to +70° C (-40° F to +158° F)

Mean Time Between Failure (MTBF): 560,000 hrs (64yrs) at +25°C operating temperature.

FCC/Industry of Canada

CE Marked

R&TTE Directive 1995/5/EC

Low Voltage Directive 72/23/EEC

EN 300 328

EN 301 489

EN 301 893

UL/IEC/EN 60950

EN 60601-1-1 and EN 60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.


AP-334 and IAP-334: APIN0334

AP-335 and IAP-335: APIN0335


CB Scheme Safety, cTUVus

UL2043 plenum rating

Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

Passpoint® (Release 2) with ArubaOS and Instant 8.3+



Aruba InstantOS

Aruba’s hardware limited lifetime warranty

Entre em contato e solicite um orçamento agora!

Precisa comprar, instalar ou migrar seu equipamento ?
Planejamos sua aquisição, instalação, implantação ou migração, para mais informações faça contato com a TND Brasil através do telefone (11) 3717-5537 , e-mail [email protected] ou envie uma mensagem.

    Ex: João

    Ex: Fabrikam Corp.

    Ex: 005800410000130

    Ex: (11) 3717-5537

    Ex: Gostaria de alugar um servidor

    Descreva o melhor possível sua duvida ou necessidade